Installation Instructions - Panels with Magnetic Strips

You've chosen your favorite graphic panel and now it's time to

showcase your pool sides!

 

PRIOR TO INSTALL: Read entire instructions. Remove your new graphic panel from the shipping package and lay out on a flat surface. It is best to allow the decal to lay flat and acclimate to room temperatures for 24 hours. May use light books to keep decal flat.

YOU WILL NEED: A clean cloth, scissors and measuring tape

Step 1 - Clean surface of pool wall(s) using a slightly damp cloth to remove dust & dirt from the area you want to apply the graphic panel.

Step 2 - Measure the section of your steel/aluminum exterior sidewall. Lay your panel on a flat surface and trim your new PoolTattooz graphic panel to fit the space (measure twice, cut once 😉). 

Step 3 - With your graphic panel still on a flat surface, cut a 12" magnetic strip (provided) in half so you have (2) 6" strips.  Remove the backing and apply 6" of magnetic strip horizontally along the top edge, about 3" from the corner then apply the second 6" magnetic strip vertically along edge, about 3" from the top corner. Repeat process for all remaining corners. 

Step 4 – Place graphic panel on the side of your pool and enjoy!

 

Change your panels seasonally or upload your family’s custom graphics to our website for a personal touch in your backyard.

Share your new backyard oasis with us on social media and receive 10% off your next order!

Thank you for supporting small businesses.